Replacement Locks For Patio Doors at Lowe's
Replacing the patio door lock is a straightforward and effective way to enhance the security of your home. But, it is crucial to conduct regular maintenance and install the lock correctly.
It is essential to identify the type of patio door lock that you have to replace it with success. You can determine the type by observing the size of the screw hole as well as end face plate type.
Identifying Your Lock's Existing Lock
It is essential to know the distinctions between different kinds of locks before deciding to buy new lock hardware. This will allow you to choose a lock that is suitable for your home and also ensure the security and safety of your home.
The most well-known type of lock is the cylinder lock, sometimes referred to pin and tumbler lock. This type of lock makes use of a combination of top pins, bottom pins and springs to keep the key hole and plug in place. Cylinder locks come in a variety of sizes, and it is important to know the exact length and width of your current cylinder before buying the replacement.
To determine the width of your existing lock using a screwdriver, loosen the screws holding the cylinder in place and then carefully remove it. Next, measure the distance between the outside edge of the cylinder and its inner end and record the measurement in millimeters. Then, you can check this number against the measurements of the new lock you're planning on buy. This will help ensure that your new lock is of the right size and fits into the hole in the door lock.
A key can also be used to test the size of an existing lock. If the key slides easily into the cylinder it's the same width as the rekey kit you require. If the key isn't able to slide into the cylinder, it is likely that your cylinder is using a a different keyway and cannot be rekeyed in order to accept that brand of key.
It is always best to follow the instructions of the manufacturer included with a kit for rekeying for each lock, since each lock comes with its own set of installation requirements. It is recommended to spend the time to thoroughly test the new lock after you have installed it to ensure it works properly and provides you with optimum security. Also, pay attention to the additional features of your new lock, as they can impact its user-friendliness.
Take a measurement of the Width
A faulty patio door lock could result in serious security issues. It is important to inspect your locks on a regular basis and replace them if necessary. This helps ensure they are safe and working properly, and it may aid in preventing issues like keys that are loose or latches that are not secure. If your locks are worn out or damaged, you can get replacements at Lowe's which will offer the security you require for your home.
Before you purchase a new patio door lock, it's important to determine the dimensions of your current one. This will give you a clear idea of the size you should buy and avoid the risk of purchasing an unsuitable lock. To determine this, you'll need to take two measurements that are the length of the backset and the depth of the case. The former refers to the distance from the edge of the lock's face to where the centre of the round hole that the handle spindle passes through and the other refers to the depth of the lock body that can be viewed from the outside of the door.
It's also important to take into consideration how you will use your doors when deciding what type of lock you need. If your sliding doors open horizontally, you'll need top and bottom tab locks that engages with the strikeplate, stopping it from being pushed or forcefully opened. If your patio doors swing vertically, you'll need to opt for a mortise lock with a hook latch with spring which provides additional security.
It's important to note the location of the screw holes when determining the dimensions of your lock. Some mortise lock screws are round while others are square. You'll have to know where the keyway is located. Some locks have a vertical keyway while others are 45-degree angled. Take a photo of the lock with your digital camera to make sure you get the right replacement.
After you've taken the measurements and have completed the measurements, it's time to begin looking for a new patio door lock. You can find a range of high-quality locks online and many of them are branded that offer advanced security features to protect your home. It is essential to look at locks and read reviews before you make a purchase. Be sure to maintain your locks regularly to avoid dirt and debris that could cause problems for your doors.
Observe the Screw Holes
Patio doors are an essential element of your home's security. They should be checked for signs of wear to ensure that they work properly. As time passes, your locks and spindle connecting the interior and exterior handles will need to be replaced. A durable lock will not only stop unwanted entry, but it will also increase security, efficiency and safety.
There are several ways to narrow your search for a new lock if you don't have the specific model. The first step is to identify the type of keyway it is using. Aluminum patio doors are often fitted with mortise locks with a rectangular cutout, while E2126 or E2079 locks are set inside a recess in the frame. If you have a digital camera, uploading a picture of the lock could aid in determining the type it is.
Another method to determine the type of lock you're using is to examine the screw holes. The screw holes on a majority of sliding patio door locks align with the latch keeper which is placed on the side jamb. However they're not always identical. For instance there are screws that are larger than others and could have an end with a different threaded. Some screws also have washers or a hex nuts attached to them, which may affect how they fit into the lock's hasp.
Once you've identified the kind of lock your home is secured with, you can begin planning to replace it. You'll need to clean the lock first using a damp cloth or brush to get rid of any debris that could be preventing its operation. After cleaning, you can apply a silicone-based lubricant in order to keep the locking mechanism smooth and quiet.
It's a great idea to replace your old screws with a longer one. This will allow you get more grip and also install the lock with less effort. After you've done this it's good to test the handle to see how it interacts with the lock.
If it isn't able to engage easily, you may need to place an hex or washer behind the hasp to allow it to be able to grip more of the door's lip. You can place an shim on the sides of the lockkeeper's jamb and see if it helps.
Check the Lock Snib
The snib is a mechanism for locking that is located inside the door handle. The snib is able to be turned off and on to open or close your patio doors and is the first thing to look at if your locks aren't functioning correctly. Also, check the keepers on the top and bottom of your door frames to see if there is any misalignment or looseness that could cause them to break. Make sure that your snib is properly seated, and that the lock isn't stuck or blocked in any way.
The most popular patio door locks are made of steel mortise latches that hold your sliding glass doors. Incorporated into the door frame they are available in various styles and are a great security measure. Some are designed to hold keys while others have an oval cutout that makes it simple to lock and unlock.
Another option is a step-on lock with a thumb screw that securely keeps your sliding doors in place without having you to turn the knob or turn the key. These locks are typically used on doors with a metal frame, but they can also be used to secure wooden or vinyl sliding door frames.
When you're looking at your current patio door lock, make note of the kind and size of the screw holes it uses to attach the escutcheon plate and lock body. This will help you choose a replacement lock with the appropriate screw holes to fit the specific hardware for your patio door. helpful resources 's also a good idea to examine your strike plate to make sure it's securely secured.
If you own Jason Windows boltlock sliding doors from 2000-2009, make sure the screws that hold the door are secure and not loosened or missing. The screws keep the snib partially open in "vent" mode, which allows airflow while promoting security. They are also essential to stop your lock from being smashed. All locks should be maintained and cleaned regularly to prevent dirt, dust, corrosion, or debris from obstructing their operation.
If your snib is damaged it could be possible to replace the entire strike plate and snib assemblage. If your snib only requires alignment, you can correct it by removing the strikeplate using a an abrasive blade and then removing the adjustment screws (located below and above the screw). You will then have to move the strikeplate upwards or down until the engagement tongue lines up the Milgard logo.